Large Format Progressive Ultra-Dense Line Source
160 dB최대 SPL
35 Hz – 20 kHz대역폭
256 kg무게
| max spl | 160 dB |
|---|---|
| weight | 256 kg / 564 lb |
| bandwidth | 35 Hz-20 kHz |
| components product | LC: 2 x 18” LF: 4 x 15” MF: 8 × 8” HF: 6 x (4” + 2.5”) coaxial drivers with a passive crossover |
| 치수 | 1500 mm (59 in) x 1005 mm (39 in) x 750 mm (30 in) |
|---|
리깅 툴 · 액세서리8
L1 System 시스템용으로 제조사가 지정한 액세서리입니다. 각 항목을 누르면 도면과 자료가 있습니다.
L1 BUMPDedicated flying frame for L1, designed for safe and efficient deployment of large-format arrays. It is compatible with both L1 and CS1, enabling flexible system configurations within a single rigging platform. The frame supports up to 10 L1 or up to 16 CS1. L1-BUMP is pre-installed with the L1CS1-RAKMOUNT, a mounting cradle for LA-RAK III.
L1-BARExtension bar designed for use with the L1-BUMP flying frame, enabling precise adjustment of the array’s site angle.
L1-CHARIOTTransport cart for two L1 enclosures, enabling safe and efficient movement on site and
in storage.
L1-PULLBACKDesigned to provide additional control over the array’s site angle and improve overall stability. It enables further adjustment of the array tilt to match the venue geometry while helping to secure the system in challenging conditions, such as wind.
L1-ROLLLift-and-roll accessory for L1 and L1D, enabling easy handling and positioning
during deployment.
L1CS1-BUMPFLIGHTA dedicated flight case for transporting rigging hardware. It accommodates either two L1-BUMP or two CS1-BUMPs, along with one L1-BAR, one K1-BP CHAIN, one K1-DELTA, and one L1-PULLBACK. It is possible to add the L1CS1-BUMBFLIGHTADDLAYER extension in order to store an additional L1-BUMP / CS1-BUMO, 2 L1-BAR / CS1-BAR, 1 L1-PULLBACK, and other smaller accessories.
L1CS1-RAKMOUNTMounting cradle for integrating LA-RAK III within L1 and CS1 rigging deployments.
L1D-CHARIOTTransport cart for one L1D enclosure, enabling safe, efficient movement on-site and
in storage.기술자료2
제조사 공식 문서입니다. 종류별로 묶었습니다.
